PRISMJET 54 Gen2, Operation Manual

Page: 150 / 305

Panel setup menu PrismJET 54 Gen2 OPERATION MANUAL
160 5.1 Setup menu
(1) Auto menu
The printer performs an automatically PF adjustment.
(2) Initial Print menu
Performs Initial Adjust Print.
(3) Init.Adj.Change menu
Sets up Initial Adjust Change.
Setting Description
—
• [Enter] key:
“Warming Up” is displayed on the operation panel and printer performs an automatically
PF adjustment.
• [Cancel] key: cancels the setting and shifts to the previous menu.
5.1.1.1.4 Dist.Adj menu
Setup item Setting Description
FeedLength 100mm to <250mm> to
500mm Changes the length (feed length) of the media feed direction
for Initial Print.
• [Enter] key:
Determines the setting.
“Printing” is displayed on the operation panel and Initial
Print starts.
After printing, the printer enters Normal.
—
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.4 Dist.Adj menu
Setup item Setting Description
Init. The set value ±50.0mm in
“Feed length” of Initial adjust
print Sets up Initial Adjust Change.
e.g) When the set value in “Feed length*” of Initial adjust
print is set to 250mm, the adjustment range in this menu is
200mm to 300mm.
—
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.4 Dist.Adj menu