PRISMJET 54 Gen2, Operation Manual

Page: 208 / 305

Maintenance PrismJET 54 Gen2 OPERATION MANUAL
218 6.1 Replacing consumable components
(3) Replacing steps
Follow the procedure below to replace the ink cartridges and high capacity pack adapter.
CAUTION
• Before operation, make sure to read the Safety Data Sheet (SDS).
• Wear protective equipment (gloves, goggles or eye protection, protective mask,
protective clothing) when handling ink.
Be cautious that ink does not get into your eye or make a contact with your skin.
• When ink gets into your eye or make a contact with your skin, wash with water
immediately.
• If left as it is, it may cause red eye or light inflammation. If it is necessary, please
see your doctor immediately.
• Do not disassemble ink cartridges or ink bags.
If disassembled, there is a possibility that ink might come into contact with eyes or
skin.
NOTE
• Do not share the ink cartridge once installed with another printer. The cartridge will not be usable
from that time onward.
• Do not give ink cartridges or ink bags strong shakes.
Doing so may cause ink leakage.
• Do not disassemble ink cartridges.
A disassembled ink cartridge or ink bags cannot be used.
• When an ink cartridge or ink bag is moved from a cold place to warm place, keep the ink cartridge
for 3 hours or more in the new printing environment before printing.
• Do not refill an ink cartridge or ink bag with ink.
It may result in abnormal printing.
• Insert or remove the ink cartridge and high capacity pack adapter at the time of replacement only.
Inserting or removing the ink cartridge and high capacity pack adapter except at the time of
replacement may result in incorrect printing.
• Be sure to use the ink before it expires.
The expired ink should be disposed of as industrial waste. The empty ink bag should be put in a
plastic bag and should be disposed of according to the local regulations.