PrismJET 54 Gen2 OPERATION MANUAL
Panel setup menu
5.1 Setup menu
187
5.1.22 Header Dump menu
This function is to specify whether to print the following information (dump data) of print data.
•
Data header
•
Data dot number (printed only when Header damp setting is “On”)
•
Printing date and time
•
Printer serial number
•
Firmware version
•
Receiving time (printed only when Header damp setting is “Dump”)
•
Receiving size (printed only when Header damp setting is “Dump”)
NOTE
• The dump data will be used as a reference material to receive technical supports.
TIP
When a print is executed in connection with computer, the setting of RIP software will be printed in the “Data Header”.
Setup Item
Set Value
Description
Header Dump
<Off>
• Only a print data will be printed.
• Damp data will not be printed.
On
After printing of print data, the dump data will be printed.
Dump
• Only a dump data will be printed, but the “Number of Dot
in Data” will not be printed.
• Print data will not be printed.
Prints the last header dump.
If no history is available, “No Print Data” will appear on the
operation panel.
—
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
Summary of Contents for 54 Gen2
Page 1: ......
Page 2: ......
Page 304: ...Appendix PrismJET 54 Gen2 OPERATION MANUAL 314 8 3 Options Supply list...
Page 305: ......
