Printronix L1024, Maintenance Manual

Page: 39 / 372

2–21 Chapter 2 – Clamshell
Base Plate for each Hinge.
See Figure 2–4. Remove 1 Screw from the top of each Hinge,
then remove the entire Clamshell Assembly from the printer.
CAUTION: Since the LSU Cable is still connected to the printer, the Clamshell
will have limited movement. Be careful not to damage the LSU, the
LSU Cable, or the Clamshell Frame.
NOTE: This is the left side hinge. The
right side hinge is a mirror
image of the left side hinge.
Step 2
Step 2
Step 3
Step 4
Step 5
Step 6
Figure 2–4. Clamshell Hinge Removal
DISASSEMBLY ( See Figure 2–4)
3. Remove 1 Screw from the Hinge Frame, then remove the Retention Plate. The Hinge Slide
can now be slid free from the Hinge Frame.
4. Remove 1 CE-ring from the Slide, then remove the Slide and Hinge Spring from the Hinge
Shaft.
5. Remove 1 E-ring from the Clamshell Frame, then remove the Locking Shaft, Shaft Collar, and
Bracket Assembly from the Hinge Assembly.