Printronix L1024, Maintenance Manual

Page: 265 / 372

12–45 Chapter 12 – Covers, Frame, and Backplane Board
J–1 Connector
Step 37
Step 38
Figure 12–25. Removing Left Side Frame
39. Remove 1 Screw from the left front corner of the Base Plate. See Figure 12–21.
40. Remove the Tractor by removing 3 Screws, then lifting the left end of the Tractor out first.
This clears the Encoder of the HVPS, and allows the Tractor room to move to the left so that
the Tractor Stepper Motor can clear the Upper Board Frame.
See Figure 12–21.
41. Disconnect the Cable from the Tractor Stepper Motor and remove the Tractor from the printer.
42. Remove 2 Screws, then remove the Inner Frame Brace. See Figure 12–21.
43. Remove 2 Screws from the bottom of the Base Frame. The Inner Frame can now be
removed from the Base Frame of the printer. See Figure 12–21.
44. Remove 1 Screw from the bottom of the Base Frame, then remove the Board Support
Bracket. See Figure 12–21.