Product & Safety Information
Bacteria can develop in the domestic water
system if certain minimum water tempera-
tures are not maintained.
HOT WATER CAN SCALD!
Water temperature over 125ºF can cause
severe burns instantly or death from scalds.
• Children, disabled and elderly are at highest
risk of being scalded.
- Never leave them unattended in or
near shower, bathtub or sink.
- Never allow small children to use a hot
water faucet or draw their own bath.
• To avoid any potential scald hazard or if
codes require specific water temperatures at
the hot water faucet, the installer must:
- Install the factory supplied thermostatic
mixing valve at this appliance and ensure it
is working property
and
- Set the domestic storage temperature to the
lowest temperature which satisfies your
hot water needs.
- Feel and adjust water temperature before
bathing or showering.
- Water drained from the system drain
valves may be extremely hot.
TO AVOID INJURY:
- Make sure all connections are tight.
- Direct water flow away from any person.
Protection must be taken against exces-
sive temperature and pressure!
TO PROTECT AGAINST EXCESSIVE
TEMPERATURE AND PRESSURE
• Check if the Temperature & Pressure
(T&P) relief valve is installed in the loca-
tion provided (DHW Side).
• Check if the 30 psi relief valve supplied
is installed in the location provided (CH
Side)
• To avoid injury, install the relief devices
to comply with local code requirements.
To prevent damage to the inner tank, the
Installer must:
• Always fill inner tank prior to outer
tank and always drain outer tank prior
to inner tank.
• Relieve primary system pressure
below 15 psig prior to draining inner
tank.
WARNING
CAUTION
CAUTION
DANGER
2