PowerDsine PowerView, User Manual, Page: 48 / 54

SNMP
Power over LAN Solutions 46 Catalog Number: 06-6910-056
Figure 5-1: Initiating Telnet
The default Password is:
Admin.
5.2.3 PowerDsine PowerView Special Commands
There are five basic commands which have been created especially for
PowerDsine PowerView. These are:
! ! ! ! user
! ! ! ! ipaccess
! ! ! ! wwwupdate
!
! !
! agentstart
5.2.3.1 User Commands
There are several user-related commands used in the program. User
commands define the names of users and their password.
Command :
Telnet> user
Command structure
:
User [list|set|delete|clear][username password]
Note The
[username password]
is not always required for this command type.
Pay strict attention to the way names are entered for the following
commands. The program is case-sensitive and does not provide feedback
should a wrong letter case be used.
List
command - displays all of those authorized to access the program:
Telnet> user list
Login_name admin pa++++
Login_name John pa++++
Login_name Stuart pa++++
Login_name Rose pa++++
Login_name Henry pa++++
Telnet> _
where:
+++++
is the particular password for that individual.