PowerDsine PowerView, User Manual

Page: 40 / 54

SNMP
Power over LAN Solutions 38 Catalog Number: 06-6910-056
4.9
Port Menu
4.9.1 About the Port Menu
The Port menu (shown in Figure 4-14) allows the user to control individual ports,
monitor their status, and set-up parameters. Specifically, via this menu, the user
can:
! ! ! ! Activate/shut-down individual ports.
! ! ! !
Allocate power per port
! ! ! ! Set-up the priority of each port
! ! ! ! Monitor the status of individual ports
!
! !
! Obtain actual current drawn at each port
! ! ! ! Establish the type of power device (PD) connected to each port
Note All change-of-state commands are done only by administrator or supervisor.
Figure 4-14: Port Menu
4.9.2 Commands
Commands vary according to the entry selected in the menu. The commands
are:
Refresh
: reverts to previous data.
Set
: saves the new data entered.
Exit:
terminates this panel and returns to Selected Device panel.