Tractor ECU (panel:app TECU)
User
manual
EXPERT 75 - HW 1.0
69
Illustration 8-22: Tractor detail view - 3-point linkage
You have the following operating options:
Calibrating the 3-point sensor
Ensure that the tractor for which the calibration is being carried out is active. Otherwise, a
confirmation prompt opens.
To calibrate the 3-point sensor, proceed as follows:
•
Select the function key F3 "Calibrate" in the "3-point linkage" tab.
•
Raise the 3-point linkage to the maximum position and press the function key F3
"MAX" (cf. Illustration 8-23).
•
Lower the 3-point linkage to the minimum position and press the function key F4
"MIN" (cf. Illustration 8-24).
•
Confirm with "OK".
