Universal Terminal (panel:app UT)
User
manual
EXPERT 75 - HW 1.0
35
Illustration 5-4: AUX assignment
Illustration 5-5: Available AUX input options
When assigning the AUX functions, the Learn mode function is available in addition to the list
selection:
The Learn mode is active.
The Learn mode is inactive.
Switching between the two modes is possible using the function key F12 (cf. Illustration 5-4).
If the Learn mode is active, an input option (e.g. joystick or switch) can be assigned to a se-
lected AUX function by pressing it directly. Assigning then takes place automatically without
having to select from the list. If the Learn mode is inactive, then assignment is only possible
via the selection list as in Illustration 5-5.
5.3
Problem solving
The following table summarises the panel:app UT error messages, shows their possible cause
and gives a suggested solution.
Problem
Solution
The attached ISOBUS machine oper-
ating screen is not displayed on the
terminal.
There may be various causes:
•
The terminating resistor is missing.
