Tractor ECU (panel:app TECU)
User
manual
EXPERT 75 - HW 1.0
72
8.2.9
Passive mode
If the tractor has a primary TECU or a higher priority TECU that provides the tractor infor-
mation via ISOBUS, the panel:app TECU switches to passive mode. The view of the panel:app
TECU in passive mode is shown in Illustration 8-26.
Illustration 8-26: Passive mode
In passive mode, the information available from another TECU on the ISOBUS is indicated by
a blue frame and the blue letter "i".
However, connection to the signal socket is only necessary if not all tractor information is
provided via the ISOBUS. In this case, missing information can be provided via the panel:app
TECU. For this purpose, the sensors must be calibrated.
8.3
Troubleshooting
The following table summarises error messages of the panel:app TECU, shows their possible
cause and gives a suggested solution.
Problem
Solution
Delete tractor
The active tractor cannot be deleted.
The active tractor cannot be deleted.
Select another active tractor.
