Note regarding the hydraulic oil level
The conveyor belt must always be retracted.
See ..... Conveyor belt [➙ 25]
Transmission oil level
1
2
3
1
Oil inlet screw
3
Oil drain screw
2
Oil level screw
If the oil seeps out of the hole of the oil level screw when the machine is on level ground,
the maximum oil level has been reached.
If the oil level is below the hole, this is the minimum oil level.
If this is the case, the transmission oil must be topped up immediately.
▪ See: Changing the transmission oil [➙ 44]
Information regarding transmission oil level
3
2
1
1
Transmission
3
Oil level screw
2
Oil inlet screw
The correct oil level is reached if the transmission oil escapes when the oil level screw is
removed.
8.7.2
Checks
37
