Recommended lubricating greases:
Manufacturer
Type
Genol
Multi-purpose grease
Fuchs
Multi-purpose grease 5028
Saw blade
Always wear protective gloves when handling saw blades.
Only reinforced POSCH saw blades may be used. Standard saw blades are too weak and
pose a safety risk.
Observe the maximum saw blade speed specified by the manufacturer.
Changing the saw blade
1
10
9
7
8
6
5
3
4
2
1
Protective cover
6
Saw spindle spanner
2
Chain
7
Clamping nut
3
Allen screw
8
Circular saw spanner
4
Aluminium bar
9
Tensioning flange (outer)
5
Tensioning flange (inner)
10 Saw blade
▪ Open the protective cover and swing backwards.
▪ Unhook the chain and swing the protective cover slowly and carefully backwards.
▪ Loosen the Allen screws in the aluminium rail and remove them.
▪ Fasten the inner tensioning flange with a piece of adhesive tape (prevents it from
slipping off the spindle).
▪ Hold the circular saw shaft with the saw spindle spanner and undo the clamping nuts
with the circular saw wrench.
▪ Remove the spring flange and the saw blade.
▪ Put the new blade in and secure it.
9.2
9.2.1
Maintenance
39
