General
Scope
This user manual applies to the following machines:
Machine type
Article no. *
Designation - Type
Drive
M1454
SmartCut 700 - Z
PTO shaft
M1474
SmartCut 700 - ZE11
PTO shaft/electric motor
*.....The item number is stamped on the machine's rating plate.
Special equipment
.....F15
Conveyor belt 1.5 m, hydraulic drive
.....F4
Conveyor belt 4 m, hydraulic drive
.....F5
Conveyor belt 5 m, hydraulic drive
.....A
Longitudinal stop can be continuously adjusted
.....DV
hydraulic three-point adjustment
.....H
Auxiliary valve on the machine for the height-adjustable chassis
.....T
Tractor chassis, 10 km/h (not approved for use in road traffic)
.....DT
Tractor chassis, detachable drawbar, 10 km/h (not approved for use in
road traffic)
Additional equipment
F0003527
Hour counter for machines with Z motor
Description
The SmartCut 700 machine is a high-power saw with a fitted conveyor belt.
The machine is driven by an electric motor or a pto.
The log carriage is stopped by activating the switch bracket (EasyStop).
The wood is inserted into the static log carriage where it slides under gravity until coming
to a stop.
Sawing is started by releasing the switch bracket (EasyStop).
The cut log drops onto the conveyor belt from where it is discharged.
The conveyor belt is driven hydraulically.
The log stop fitted as standard allows logs with a length of 15, 18, 20, 25, 27, 30, 33, 35,
40, 45, 50, 52 cm to be sawn uniformly.
3
3.1
3.2
General
12
