Switch bracket (EasyStop)
1
2
1
Switch bracket - pressed
2
Switch bracket - not pressed
When the switch bracket is pressed, the log carriage comes to a stop. This position allows
the log carriage to be loaded with billets conveniently.
When you release the switch bracket, cutting is triggered and the billet is cut (into several
pieces, depending on the set cut length).
Ball valve
2
1
1
Ball valve – retract conveyor belt
2
Ball valve – extend conveyor belt
When the ball valve is closed (extend conveyor belt), the telescopic conveyor belt is
retracted and the belt is tensioned.
When the ball valve is open (retract conveyor belt), the conveyor belt is retracted.
Ball valve - Switch latency
2
1
1
Ball valve - Switch latency on
2
Ball valve - Switch latency off
With the ball valve opened (switch latency on), the log carriage is held at the outside end
position for a short time to enable easier sliding of the billet to the stop (preferably in the
case of longer lengths).
Operation
22
