Additional equipment
Hour meter (PTO drive)
1
2
3
4
1
Button – "Info"
3
Display – PTO shaft speed
2
Display – Operating hours
4
Display - Battery voltage
Function:
The rotation speed is shown on the display as soon as the machine is operational.
Pressing the "Info" button displays the operating hours.
The time is shown in hours and tenths of an hour (e.g. 12.7 = 12 hours and 42 minutes).
The battery voltage is displayed on the bottom line.
▪ If the voltage falls below 8.1 V (for the block cell version) or 3.2 V (for the round cell
version), the battery should be changed (special long-life battery, item number: block
cell Z4200013 or round cell Z4200015).
Meter faults:
Fault
Cause
Rectification
Nothing shown on the
display (when the PTO
turns)
Sensor distance incorrectly
adjusted
Connection cable to sensor
faulty
Adjust distance to sensor ring
(3 - 5 mm)
Replace sensor (with cable)
Nothing shown on the
display (when the "Info"
button is pressed)
Flat battery
Replace the battery (special
long-use battery)
11
11.1
Additional equipment
48
