Conveyor belt
Conveyor belt - set central running
1
2
3
1
Fastening screw
3
Tensioning screw
2
Lock nut
▪ Slightly loosen the fastening screws on each side of the conveyor belt.
▪ Loosen the lock nuts on both tensioning screws.
▪ Align the return drum by tightening both tensioning screws evenly.
▪ Lock the lock nuts on both tensioning screws.
▪ Tighten the fastening screws on both sides.
Cleaning
Before cleaning work is carried out on the machine, it is vital that the drive is switched off
and secured to ensure that it cannot be switched on accidentally or started up by
unauthorised persons.
Disconnect the machine from the mains.
▪ In addition, pull out the plug of the device.
▪ Disengage the universal joint shaft on the tractor.
– Before disengaging, turn the manual throttle to minimum.
▪ Remove the universal joint shaft from the tractor.
Clean the machine regularly to ensure proper operation.
Only wash new machines (during the first 3 months) with a sponge.
▪ The paint is not yet completely set, so cleaning with a high pressure cleaner may
damage the finish.
Once work is complete
In order to achieve a longer service life of the wearing parts (guides, bearing positions, etc.),
we recommend cleaning the machine after every unit of work (working day).
This means that the machine also automatically undergoes a check, and maintenance work
(lubrication, etc.) can be carried out more effectively.
9.5
9.5.1
9.6
Maintenance
46
