Troubleshooting
ROBO-8716VG2A User’s Manual
5-7
Figure 5-9
After done with the installation of SATA hardware, please enter system BIOS to
enable Serial ATA function. Otherwise, Serial hardware won’t be recognized. To
enable SATA function, please see as following:
Q: Can I build Raid system on SATA bus with ROBO-8716VG2A?
A:
No, it cannot. It is because ROBO-8716’s south bridge is ICH5 HR, which doesn’t
support RAID function but ICH5 R that provides RAID function.
Q: How can I build up an AT system using ATX power supply
A:
No, ROBO-8716VG2A can’t support system in AT mode.
