BIOS Setup Information
ROBO-8716VG2A User’s Manual
4-20
Hot Key Power On
In the event of “Power On Function” being configured as “Hot Key”, this item will
be enabled for tuning.
The choice: Ctrl-F1 to Ctrl-F12.
Onboard FDC Controller
This item allows you to enable/disable onboard Floppy disk controller.
The choice: Enabled, Disabled.
Onboard Parallel Port
This item allows you to configure I/O address of the onboard parallel port.
The choice: Disabled, 378/IRQ7, 278/IRQ5, and 3BC/IRQ7.
Parallel Port Mode
There are four different modes for the onboard parallel port:
SPP
Switch to SPP mode
EPP
Switch to EPP mode
ECP
Switch to ECP mode
ECP + EPP
Switch to ECP + EPP mode
Normal
Switch to Normal mode
EPP Mode Select
Select different version of EPP mode.
The choice: EPP1.7, EPP1.9.
ECP Mode Use DMA
Select a proper DMA channel for ECP mode.
The choice: 1, 3.
PWRON After PWR-Fail
This item allows user to configure the power status of using ATX power supply after
a serious power loss occurs.
On
System automatically restores power back
Off
System stays at power –off
