Troubleshooting
ROBO-8716VG2A User’s Manual
5-9
Q: I am using an ATA-66 (or 100) hard drive, how can I know that ATA-66
function is started??
A:
You need to use the 80-pin ATA-66 IDE flat cable to have this function ready.
During POST, you can see ATA-66 (or 100) message while hard drive is being
detected. Besides, after Microsoft series OS installation successfully, you must
install ATA-66/100 driver, then the function can be active.
Q: After inserting Compact Flash, why doesn’t it work at all?
A:
Compact flash is occupied with the master device of IDE Secondary. If there is
any device occupying this Secondary IDE Master channel, please remove it or set
it as a slave device.
Q: Can I use backplane which follow the PICMG 1.0 specification?
A:
No.Robo-8716VG2A based on PICMG 1.2 , 64-bit PCI/PCI-X definition. It can’t
compatibility on the PICMG 1.0 backplane.
PICMG 1.0 backplane
PICMG 1.2 backplane
