Troubleshooting
ROBO-8716VG2A User’s Manual
5-3
ATX Power Setting
This section would be more likely to introduce you how to set up ATX mode on your
ROBO-8716VG2A . Please refer to the following instruction.
Step1: Connect 20-pin power cable of the ATX POWER with ATX POWER
CONNECTOR (20-pin) on the backplane (Figure 5-4)
Figure 5-4
Step2: ROBO-8716VG2A requires power drawing through golden finger via
backplane and power connector (J3). The CPU supplementary Power
Connector (J3) has to be connected to the system all the time. Otherwise, the
system won’t boot up properly.
Figure 5-5
