System Installation
ROBO-8716VG2A User’s Manual
3-2
3) Push down the lever to lock processor chip into the socket once CPU fits.
4) Follow the installation guide of cooling fan or heat sink to mount it on CPU
surface and lock it on the socket 478.
Note:
You should know Pentium 4 processor need extra 12V power source. DON’T
FORGET TO CONNECT 4pin 12V connector to J3!
J3: 4P Header for CPU 12V Power
PIN No.
Signal Description
1 GND
2 GND
3 +12V
4 +12V
Removing CPU
1) Unlock the cooling fan first.
2) Lift the lever of CPU socket outwards and upwards to the other end.
3) Carefully lifts up the existing CPU to remove it from the socket.
4) Follow the steps of installing a CPU to change to another one or place handling
bar to close the opened socket.
Configuring System Bus
ROBO-8716VG2A will automatically detect the CPU used. CPU speed of Intel P4 can
be detected automatically.
JP1 : Mobile Pentium 4/Northwood(Prescott) Selection
JP1
Process Selection
Open Normal
Support
Short
Mobile P4-M and Mobile Celeron Support
