Quantum Design ZillioX 6 Manual Download Page 1

Page: 1 / 59

Notice

The information in this document is subject to change in order to improve reliability, design,

or function without prior notice and does not represent a commitment on the part of this

company. In no event will we be liable for direct, indirect, special, incidental, or consequen-

tial damages arising out of the use or the possibility of such damages.

All trademarks are the property of their respective owners.

For further information, please visit our web-site: “ www.qdigrp.com” .

Item Checklist

Completely check your package. If you discover damaged or missing items, contact your

retailer.

ZillioX 6 motherboard

QDI Motherboard Utility CD-ROM

Retention Module

I/O shield (manufacturing option)

1 IDE ribbon cable

1 serial port ribbon cable (25-pin connector)with bracket (manufacturing option)

1 floppy ribbon cable

User’ s manual

Summary of Contents for ZillioX 6




























































Search results

Summary of Contents for ZillioX 6

Reviews:

Related manuals for ZillioX 6

Brands by name

Popular brands

Quantum Design ZillioX 6, Manual

Search results

Summary of Contents for ZillioX 6

Reviews:

Related manuals for ZillioX 6

Brands by name

Popular brands