Quantum Design ZillioX 6, Manual

Page: 12 / 59

Manual for ZillioX 6
Enable/Disable on-board VGA(JP10)
If you want to use on-board VGA, close JP10(default). Otherwise, set JP10 open for
disabling the on-board VGA.
Speaker-out/Line-out Selection(JP8, JP9)
If you want to set the Speaker-out/Line-out Jack as Speaker out, set JP8 & JP9 with pin1&
pin2 closed(default). Otherwise, set JP8 & JP9 with pin2 & pin3 closed for Line out
.
Enable keyboard password and PS/2 mouse power-on function
The motherboard provides advanced keyboard password and PS/2 mouse power-on
function. To use these functions, set JP3 with pin1& pin2 closed(default). Otherwise, set
JP3 with pin2 & pin3 closed for disabling these two functions.
In order to implement these functions, you need to set “ POWER ON Function” as
Pass-
word/Mouse Left/Mouse Right
accordingly in the “ INTEGRATED PERIPHERALS”
section of CMOS Setup. If set as
Password
, the keyboard
Enable on-board VGA
Disable on-board VGA
JP10
JP10
7
Chapter 2
Speaker out
Line out
3 2 1
3 2 1
JP9
JP8
JP9
JP8
Disable
Enable
3 2 1
3 2 1
JP3
JP3