Headlight adjustment
Headlight adjustment should be done with
a headlight aiming device under the f o l l o w -
ing conditions:
At curb weight of car (i.e. car ready for use
and with full fuel tank).
Driver's seat should be occupied by a per-
son or a w e i g h t of approx. 155 lbs (70 kg).
Tire pressure must be correct.
Roll car f o r w a r d a few feet so that the sus-
pension seeks its normal p o s i t i o n .
Adjustment screws
Each headlight and f o g light has t w o adjust-
ing screws, one for lateral setting, and one
for v e r t i c a l . By turning these screws left or
right, the c o r r e s p o n d i n g adjustment in beam
position is effected.
Screw " a " (lateral adjustment)
right turn = beam moves right
left turn = beam moves left
Screw "b" (vertical adjustment)
right turn = beam moves up
left turn = beam moves d o w n
67
