Light switch - with ignition on
0 - lights off
1 - parking lights on
2 - headlights on and raised
In positions 1 and 2, the f o l l o w i n g lights are
also o n :
- tail lights
- instrument illumination
- shift pattern illumination for automatic
transmission gearshift lever
Instrument illumination control
The brightness of the instrument illumina-
tion can be adjusted by turning the thumb-
wheel on the left side underneath the instru-
ment cluster.
dimmer flasher and parking light
lever - with ignition on
Turn signal/highbeam/lowbeam/
Turn signal indicator
Lever up - right turn signal (arrow 3)
Lever d o w n - left turn signal (arrow 4)
The turn signal lever turns off automatically
w h e n the steering wheel is straightened out
after completing a turn.
If a turn signal bulb becomes defective, the
indicator light flashes at about twice the nor-
mal frequency.
Lane changer
To indicate your intention w h e n changing
lanes on expressways, slightly lift or depress
the turn signal indicator lever to the resist-
ance point. The lever turns off automatically
when released.
High beam/low beam - with ignition on and
light switch in position 2, push lever f o r w a r d
to select high beam (arrow 1). The blue in-
dicator light in the instrument cluster c o m e s
on when high beam is switched on.
Pull lever t o w a r d steering wheel (arrow 2)
to select low beam.
Headlight dimmer flasher - with ignition on
or off
You can signal with your headlights (instead
of horn) by pulling lever t o w a r d steering
wheel ( a r r o w 2) to point of resistance and
then releasing it. Repeating this operation
will flash the high beams during daylight and
at night.
Parking lights - with ignition off
Lever up -
right side parking lights on (arrow 3)
Lever down -
left side parking lights on (arrow 4)
19
