Interior lights
The following description applies to both
interior lights:
1 - Insert s c r e w d r i v e r in cut-out on head-
liner and carefully pry out the lamp hous-
ing.
2 - Remove defective bulb between contact
springs and insert new bulb.
3 - Insert one side of the lamp housing into
cut-out and press firmly on the other
side. Light unit will snap into place.
Ashtray lights
1 - Remove the t w o screws in ashtray hous-
ing and pull the ashtray housing upward
and out.
2 - Slide bulb holder out of the housing and
replace defective bulb w i t h new bulb.
3 - S l i d e bulb holder back into housing and
check light by turning on the ignition.
4 - Reinstall the ashtray housing.
66
