Front turn signal lights (A)
Front parking lights (B)
1 - remove screws from plastic trim, take off
trim.
2 - remove s c r e w s holding the lens, and
remove lens.
3 - remove bulb from bulbholder, and fit new
bulb.
4 - reinstall lens, tighten s c r e w s . Check
functioning of light.
5 - install plastic trim and tighten retaining
screws.
Fog lights
1 - remove screws from plastic trim, take off
t r i m .
2 - remove Phillips s c r e w s . Take off lamp.
3 - disconnect wire. Push down holding
clamp for bulb.
4 - remove defective bulb and replace. Be
sure guide pins on bulb base fit into
socket of reflector.
5 - r e i n s t a l l lamp, tighten screws. C h e c k
functioning and adjustment of light.
6 - i n s t a l l plastic trim and tighten retaining
s c r e w s .
64
