manualshive.com logo in svg

Pontiac 1999 Montana, Owner'S Manual

Share
Download
Pontiac 1999 Montana Owner'S Manual Download Page 86

yellow

blue     

1-80

4. Buckle the belt. Make sure the release button is

positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.

5. To tighten the belt, pull its free end while you push

down on the child restraint. If you’re using a
forward

-

facing child restraint, you may find it

helpful to use your knee to push down on the child
restraint as you tighten the belt.

6. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, just unbuckle the vehicle’s
safety belt. It will be ready to work for an adult or larger
child passenger.

Securing a Child Restraint in the Center
Seat Position (Bucket Seat)

You’ll be using the lap belt. See the earlier part about
the top strap if the child restraint has one. Be sure to
follow the instructions that came with the child restraint.
Secure the child in the child restraint when and as the
instructions say.

1. Put the restraint on the seat.

Summary of Contents for 1999 Montana

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands