manualshive.com logo in svg

Pontiac 1999 Montana, Owner'S Manual

Share
Download
Pontiac 1999 Montana Owner'S Manual Download Page 136

yellow

blue     

2-40

Starting Your Engine

Move your shift lever to PARK (P) or NEUTRAL (N).
Your engine won’t start in any other position 

--

 that’s a

safety feature. To restart when you’re already moving,
use NEUTRAL (N) only.

NOTICE:

Don’t try to shift to PARK (P) if your vehicle is
moving. If you do, you could damage the
transaxle. Shift to PARK (P) only when your
vehicle is stopped.

1. Without pushing the accelerator pedal, turn your

ignition key to START. When the engine starts, let
go of the key. The idle speed will go down as your
engine gets warm.

NOTICE:

Holding your key in START for longer than 
15 seconds at a time will cause your battery to be
drained much sooner. And the excessive heat can
damage your starter motor. Wait about 
15 seconds between each try to help avoid
draining your battery or damaging your starter.

2. If it doesn’t start right away, hold your key in

START. If it doesn’t start in three seconds (or starts
but then stops), push the accelerator pedal about
one

-

quarter of the way down for 12 more seconds, or

until it starts.

Summary of Contents for 1999 Montana

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands