manualshive.com logo in svg

Pontiac 1999 Montana, Owner'S Manual

Share
Download
Pontiac 1999 Montana Owner'S Manual Download Page 70

yellow

blue     

1-64

6. Select only one side of the harness. Place the harness

over the child’s shoulder.

7. Push the latch plate (B) into the buckle until it clicks.

Be sure the buckle is free of any foreign objects that
may prevent you from securing the latch plates. If
you can’t secure a latch plate, see your dealer for
service before using the child restraint.

8. Place the other side of the harness over the 

child’s shoulder.

9. Push the latch plate into the buckle until it clicks.

10. Pull up on both latch plates to make sure they 

are secure.

Summary of Contents for 1999 Montana

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands