manualshive.com logo in svg

Pontiac 1999 Montana, Owner'S Manual

Share
Download
Pontiac 1999 Montana Owner'S Manual Download Page 335

yellow

blue     

6-29

NOTICE:

D Using the wrong fluid can badly damage

brake system parts. For example, just a few
drops of mineral

-

based oil, such as engine

oil, in your brake system can damage brake
system parts so badly that they’ll have to be
replaced. Don’t let someone put in the
wrong kind of fluid.

D If you spill brake fluid on your vehicle’s

painted surfaces, the paint finish can be
damaged. Be careful not to spill brake fluid
on your vehicle. If you do, wash it off
immediately. See “Appearance Care” in 
the Index.

Brake Wear

Your vehicle has front disc brakes and rear drum brakes.

Disc brake pads have built

-

in wear indicators that make a

high

-

pitched warning sound when the brake pads are worn

and new pads are needed. The sound may come and go or
be heard all the time your vehicle is moving (except when
you are pushing on the brake pedal firmly).

CAUTION:

The brake wear warning sound means that soon
your brakes won’t work well. That could lead to
an accident. When you hear the brake wear
warning sound, have your vehicle serviced.

NOTICE:

Continuing to drive with worn

-

out brake pads

could result in costly brake repair.

Some driving conditions or climates may cause a brake
squeal when the brakes are first applied or lightly
applied. This does not mean something is wrong with
your brakes.

Properly torqued wheel nuts are necessary to help
prevent brake pulsation. When tires are rotated, inspect
brake pads for wear and evenly torque wheel nuts in the
proper sequence to GM specifications.

Summary of Contents for 1999 Montana

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands