manualshive.com logo in svg

Pontiac 1999 Montana, Owner'S Manual

Share
Download
Pontiac 1999 Montana Owner'S Manual Download Page 190

yellow

blue     

2-94

Engine Coolant Temperature 
Warning Light

This light will come on
when your engine gets 
too hot.

If this light comes on, it means that your engine coolant
has overheated. If you have been operating your vehicle
under normal driving conditions, you should pull off the
road, stop your vehicle and turn off the engine as soon
as possible.

In “Problems on the Road,” this manual shows what to
do. See “Engine Overheating” in the Index.

Engine Coolant Temperature Gage

United States

Canada

This gage shows the engine coolant temperature. If the
gage pointer moves into the red area, your engine is 
too hot!

Summary of Contents for 1999 Montana

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands