manualshive.com logo in svg

Pontiac 1999 Montana, Owner'S Manual

Share
Download
Pontiac 1999 Montana Owner'S Manual Download Page 174

yellow

blue     

2-78

Use the adjustable tiedown
loops in the side rails to
help secure large loads.

Reposition the tiedowns by turning them
counterclockwise, then slide them along the side rail.
Turn the tiedowns clockwise to tighten them in place.

If you wish to attach the luggage tiedowns or other
compatible bicycle or ski accessory racks to the
crossrail, use the adjustable tapped plates under the
bumper strips.

Lift the end of the bumper strip with a flathead
screwdriver and cut off enough of the strip to access the
tapped plates.

Summary of Contents for 1999 Montana

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands