manualshive.com logo in svg

Pontiac 1999 Montana, Owner'S Manual

Share
Download
Pontiac 1999 Montana Owner'S Manual Download Page 342

yellow

blue     

6-36

Front Sidemarker

1. Open the hood.

2. Remove the thumb screw attaching the parking/turn

signal lamp assembly to the headlamp assembly.

3. Pull the parking/turn signal lamp assembly away

from the vehicle.

4. Unscrew the bulb socket from the lamp assembly by

turning it counterclockwise.

5. Replace the bulb by pulling the old one out and

gently pushing the new one into the lamp socket.

6. Line up the tabs on the socket with the gaps in the

socket holes and screw the bulb socket back into the
lamp housing.

Summary of Contents for 1999 Montana

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands