manualshive.com logo in svg

Pontiac 1999 Montana, Owner'S Manual

Share
Download
Pontiac 1999 Montana Owner'S Manual Download Page 21

yellow

blue     

1-15

To raise a seatback, pull the nylon strap while raising the
seatback until it locks upright.

To fold down the seatback,
lift up on this lever located
on the front of the seatback.

Use the lever to raise or lower the seatback to the
desired position.

When raising or reclining a seatback to an upright
position, push and pull on the seatback to check that it is
locked upright.

Adjusting the Bucket Seats

There are two adjustment levers on each seat to adjust
the seat forward or rearward.

One is located below the center, in front of the 
bucket seat.

Summary of Contents for 1999 Montana

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands