manualshive.com logo in svg

Pontiac 1999 Montana, Owner'S Manual

Share
Download
Pontiac 1999 Montana Owner'S Manual Download Page 195

yellow

blue     

2-99

Power Sliding Door Warning Light

This light will come on if
the power sliding door is
not completely closed and
the ignition is turned to
RUN or START.

If you shift the transaxle out of PARK (P) while the
power sliding door is open or in the process of closing,
and the power sliding door override feature is disabled,
a buzzer will sound. This is a warning that the power
sliding door is not completely closed.

CAUTION:

If you shift the transaxle out of PARK (P) and
accelerate before the power sliding door latches
closed, the door may reverse to the open position.
A child or others could fall out of the vehicle and
be injured. Always make sure the power sliding
door is closed and latched before you drive away.

Door Ajar Light

This light will come on
when the ignition is turned
to RUN or START and the
driver’s/passenger’s door or
hatch is open.

It may also come on if a sliding door is not in the fully
latched position.

PASS-Key

R

 III Security Light

If you are ever driving and
this light comes on and
stays on, you will be able to
restart your engine if you
turn it off.

Your PASS

-

Key III system, however, is not working

properly and must be serviced by your dealer. Your
vehicle is not protected by the PASS

-

Key III system at

this time.

Summary of Contents for 1999 Montana

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands