manualshive.com logo in svg

Pontiac 1999 Montana, Owner'S Manual

Share
Download
Pontiac 1999 Montana Owner'S Manual Download Page 108

yellow

blue     

2-12

Switchbanks

There are two sets of switchbanks located in the front of the 
vehicle. The switches will vary with the options that are on 
your vehicle. It is useful to become familiar with them since 
they are used frequently while operating the vehicle.

Overhead Console Switchbank

This switchbank is located in the overhead console. The
switches that you may find in this switchbank are the
Interior Lamps Override, Power Sliding Door and
Power Rear Quarter Windows. If your vehicle does not
have some of the options controlled by these switches,
there will be a blank button in its place.

For more information, please see each of these features
in the Index.

Instrument Panel Switchbank

This switchbank is located in the instrument panel below
the comfort controls. The switches and controls that you
may find in this switchbank are the Rear Fan Knob,
Rear Window Wiper/Washer, Fog Lamps and Traction
Control. If your vehicle does not have some of the
options controlled by these switches, there will be a
blank button in its place.

For more information, please see each of these features
in the Index.

If your vehicle is not equipped with the optional rear
climate control system, there will be a storage space in
this switchbank. The rubber mat can be removed for
cleaning. Snap the mat into place after cleaning.

Summary of Contents for 1999 Montana

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands