Pontiac 1999 Montana Owner'S Manual Download Page 23

Page: 23 / 440

yellow

blue

1-17

You can also lift the lever on the side of the seat to
release the rear latches from the floor pins.

Do not let go of the straps or lever until the seat is
folded all the way forward.

4. To unlatch the front latches, with the seat folded

forward, squeeze the angled latch release bar toward
the straight crossbar.

5. Remove the seat by rocking it slightly toward the

rear of the vehicle and then pulling it out. This
should be done in one motion.

Summary of Contents for 1999 Montana

























































































































































































































































































































































































































































Search results

Summary of Contents for 1999 Montana

Reviews:

Brands by name

Popular brands

Pontiac 1999 Montana, Owner'S Manual

Search results

Summary of Contents for 1999 Montana

Reviews:

Brands by name

Popular brands