User manual
PONSEL
Ref.: NOTICE_ACTEON_2020_v003
V : 003
14/57
2.3.3 Installing an Elbowed Sensor-Holder Perch (ref: PONPPCC-CIR) or Straight
Sensor-Holder Perch (ref: PONPPCD-CIR) on QRPM (ref: PONSPFR and
PONSPFR2)
1)
Fix the stainless steel QRPM to the infrastructure.
2)
Next, fix a sensor-holder perch to the stainless steel QRPM as shown in the diagram below.
Figure 7 – Installing a perch on a QRPM with one or two sliders
A second slider may be added to install a second sensor-holder perch for the temperature sensor (see diagram
above).
