manualshive.com logo in svg

Pompetravaini SA Series, Operating Manual, Page: 2 / 48

Share
Download
Pompetravaini SA Series Operating Manual Download Page 2

Operating manual liquid ring vacuum pumps and compressors series TRH - TRS - TRM - TRV - SA & Systems type HYDROSYS - OILSYS 

2 

OPERATING MANUAL FOR INSTALLATION, 

START-UP AND MAINTENANCE 

FOR LIQUID RING VACUUM 

PUMPS AND COMPRESSORS 

This  manual  applies  to  TRAVAINI  liquid  ring  pumps  single  stage  series 

TRM

, 

TRS

, 

TRV

,  double  stage  series 

TRH,

 

compressors  series 

SA

  and  systems  series 

HYDROSYS

  and 

OILSYS,

  which  utilise  above  pump  series.  (Please  see 

chapters 20 or 21 for details pertaining to systems). 
 
NOTE: 

Unless otherwise specified, the term pump used throughout this manual means also pump/motor assembly or 
system type HYDROSYS and/or OILSYS. 

 
Manufacturer: 

POMPETRAVAINI

 

S.p.A. 

Via per Turbigo, 44 - Zona Industriale - 20022 CASTANO PRIMO - (Milano) - ITALY 

Tel. 0331 889000 - Fax. 0331 889090 

– www.pompetravaini.com 

WARRANTY:  All  products  manufactured  by  POMPETRAVAINI  are  guaranteed  to  meet  the  conditions  listed  on  the 

general terms & conditions of sales and/or conditions listed on the order confirmations. 

 

Failure  to  strictly  adhere  to  the  instructions  and  recommendations  listed  in  this  manual,  will  void  the 
manufacturer’s warranty. Guarantee  will  be preserved only  if the pump maintenance is carried out by 
Pompetravaini  or  an  authorized  service.  Any  modification  introduced  to  the  pump  without  the 
authorization of Pompetravaini will lead to the loss of the guarantee

.

 

 

If  it  is  strictly  necessary  to  dismantle  the  pump,  please  consult  Disassembling  Instructions  on  our 
website "www.pompetravaini.com

”. 

 

 

This manual is valid only for the listed pump series. This manual  IS NOT for the total installation. Instruction 
and maintenance manual for the installation must be obtained from the engineer that designed the installation. 
Furthermore the installation manual will take precedence over the pump manual. 

 

 

The  liquids  handled  by  the  pumps  and  also  their  parts  could  be  potentially  dangerous  for  persons  and 
environment: provide their  possible disposal in conformity  with the laws into force and  a proper environment 
management. 

 

 

The present manual is not assigned for pumps subjected to the ATEX 2014/34/EU directive. In case the pump 
is  assigned  in  environments  subjected  to  the  application  ATEX  99/92/CE  directive  or  in  case  the  pump  is 
provided with a nameplate indicating the ATEX stamp, it strictly forbidden proceed to start up the pumps but 
necessary to consult POMPETRAVAINI for clarifications. 
For pumps subjected to the ATEX 2014/34/EU directive it is available a dedicated integrative manual.

 

 
 

According  to  what  expected  from  2012/19/UE  Directive  on  Waste  Electric  and  Electronic  Equipment  the  electrical 
pump assembly from us supplied (pump coupled with an electrical motor of Pompetravaini supply or customer supply) 
placed  on  the  market  after  the  15

th

  of  August  2018  fell  within  the  limits  of  application  of  the  Directive.  As  a 

consequence, conforming to article 14 of the 2012/19/UE Directive of the European Parliament of the 4

th

 of July 2012, 

Pompetravaini Spa is registered on the Italian list of EEE manufacturer. 
The  electrical  pump  assembly  supplied  by  Pompetravaini  Spa  that  should  be  discontinued  from  use  must  not  be 
disposed with common waste because it is composed of different materials that can be recycled at the appropriate 
facilities.  If  it  is  not  intended  to  proceed  autonomously  at  the  management  of  the  electrical  pump  assembly  at 
authorized disposal companies it is possible to contact the Pompetravaini branch closer to you that will give you the 
necessary information on a proper disposal in accordance with mandatory laws. 
The pump unit must be previously cleaned up by the pumped product upon disposal. 
After reclamation the electrical pump assembly is not potentially dangerous for human health and environment, not 
containing harmful substances according to 2011/65/UE (RoHs) Directive, but if abandoned in the environment will 
have a negative impact on the ecosystem. Sending the electrical pump assembly to an adequate process of disposal 
and recovery of materials protect the environment and help to limits consumption of available resources with effective 
recycling of materials. 

The abandonment in the environment of the apparatus or the illegal disposal of the same 

are punished by law. 

In  preparing  this  manual,  every  possible  effort  has  been  made  to  help  the  customer  and  operator  with  the  proper  installation  and  operation  of  the 
pump  and/or  system.  Should  you  find  errors,  misunderstandings  or  discrepancies  please  do  not  hesitate  to  bring  them  to  our  attention.  

Continuing research of POMPETRAVAINI results in product improvements: therefore any specifications may be subject to change without notice. 

i

Summary of Contents for SA Series

















































Reviews:

No comments