44
The Impulse Web Server
Impulse™ L
TX Multimedia Whiteboar
d System
The Admin Update Subsection
Update Status:
Registered users receive information about free firmware
updates from PolyVision. This message indicates the status of the update
currently under way.
Update file:
To update Impulse firmware:
1
On a computer with Internet access sharing the same LAN as your
Impulse board, enter the path to the PolyVision firmware update file, or
click ”Browse” to locate a firmware update file.
2
Click “Upload.” Files are automatically unzipped and loaded into the
Impulse system internal memory. After the update files are loaded onto
the Impulse system, a message appears indicating that you are ready
for the next step.
WARNING
Do not disconnect the power while the Impulse firmware is updating.
Permanent damage may result.
3
Click “Reboot Whiteboard.”
4
After the update is complete, click the browser’s “Back” button to
return to the Impulse web page. (Do NOT click the browser’s “Refresh”
button, as this will initiate the upgrade again.
5
Repeat for any additional update files sent by PolyVision.
LTX_UG_04.fm Page 44 Thursday, April 7, 2005 11:38 AM
