12
Impulse Whiteboard Operation
Impulse™ L
TX Multimedia Whiteboar
d System
To capture images on a floppy diskette:
1
Open the right storage bin, exposing the floppy drive on the right side
of the control panel.
2
Insert a formatted diskette in the floppy drive.
3
When you are ready to capture, press Disk.
4
Continue your presentation after you hear the “camera shutter.” The
Disk LED flashes green until the save is complete. The disk drive
begins to write almost immediately. Writing to disk can take up to 30
seconds, depending upon the complexity of the image.
note:
NOTE:
If the LED blinks yellow, no diskette is inserted in the diskette drive. If the
LED blinks red, one of the following may have occurred:
•
A bad or unformatted diskette is inserted in the control panel.
•
The diskette is full.
The voice prompt provides additional information.
To remove the floppy diskette:
1
Wait until the LED stops blinking.
Quick Capture
Printer
Disk
Website / Archive
A
CCESS
N
UMBER
Password Protection
LTX_UG_04.fm Page 12 Thursday, April 7, 2005 11:38 AM
