10
Impulse Whiteboard Operation
Impulse™ L
TX Multimedia Whiteboar
d System
I
MPULSE
W
HITEBOARD
O
PERATION
T
HREE
W
AYS
TO
O
PERATE
THE
B
OARD
The Impulse system provides three ways to operate the board:
•
simply walk up, write on the board, and capture images on the printer,
floppy diskette, or website/archive as described below
•
connect a projector and scroll through captured images that are
saved to the archive as described on page 15
•
connect your laptop computer and projector to the Impulse system for
multimedia interactivity as described on page 21
note:
NOTE:
When you walk up to use an Impulse board, it is a good idea to press the
Start button before you begin to write. This clears the internal memory of
any writing from a previous user.
C
APTURING
I
MAGES
Whether the board contains writing, projected images from the board’s
archive, or your projected computer screen, the Impulse system gives you
a choice of three ways to capture images of the whiteboard:
•
on the printer
•
on a floppy diskette
•
on the website/archive
You can capture images in any combination. Refer to “Capturing Images in
any Combination” on page 14.
Capturing Images on the Printer
The Impulse system comes with its own printer, which can be networked
over an Ethernet network or connected through wireless transmission,
depending on how your system was purchased. The Ethernet network
printer receives data via the Ethernet print server adapter connected to the
same local area network (LAN) as the Impulse system.
LTX_UG_04.fm Page 10 Thursday, April 7, 2005 11:38 AM
