20
Impulse Whiteboard Operation
Impulse™ L
TX Multimedia Whiteboar
d System
6
To print the image (excluding writing you might have added to the
board while projecting the image) use the stylus to tap the Print button
in the on-screen display tools.
7
If you prefer to stand on the left side of the projected image, you can
toggle the tools between the lower left or lower right edge of the
display. To switch the tool position, tap the tools switch in the on-
screen display.
8
You can use a marker to write over or beside the projection on the
board. You can then capture a new image that includes the writing and
the projection by pressing the Print, Disk, or Website/Archive button
on the control panel. The new image includes the writing and
projection either merged or separate, depending on the projection
mode. Refer to “Choosing a Projection Mode” on page 25.
9
To delete an image from the board’s archive, access the board’s
website and delete the image from there. (Refer to “Accessing Your
Impulse Web Server” on page 31.) You cannot delete images using
the Archive display.
Print Button
Tools Switch
LTX_UG_04.fm Page 20 Thursday, April 7, 2005 11:38 AM
