The Impulse Web Server
39
Impulse™ L
TX Multimedia Whiteboar
d System
Subnet Mask:
This network reference is determined automatically by
DHCP, or you may assign it manually here if the “Use DHCP” check box is
not checked.
Default Gateway:
The Impulse system uses this gateway address only
when you update firmware over the Internet. It is determined automatically
through DHCP, or you may assign it manually here if the “Use DHCP”
check box is not checked.
DNS:
Enter the address of the local DNS server. It is determined
automatically through DHCP, or you may assign it manually here if the “Use
DHCP” check box is not checked.
Domain name
: Enter the domain name of the network which includes the
Impulse system. It is determined automatically through DHCP, or you may
assign it manually here if the “Use DHCP” check box is not checked.
Hostname registration [X] Use DNS server. (Reboot to take effect):
To register the host name with the DNS server and reboot the Impulse
system, check this box and click “Save Changes.”
Print through:
The Impulse system comes with its own color printer. The
factory default printer includes a network print server adapter with an
Ethernet connector for plugging into the same LAN as the Impulse system,
although Bluetooth wireless color printing is also supported. You can also
print to any PCL-4 compatible printer connected directly to your network.
Bluetooth printer channel:
This field displays the Bluetooth device
address of the optional wireless color printer for this board. If you need to
change the wireless color printer:
1
Find your printer’s Bluetooth device address. Consult the
documentation for your printer or adapter for instructions on obtaining
this information.
2
Enter the Bluetooth device address in the “Bluetooth Printer Channel”
field.
3
Click “Save changes.”
Network printer address:
To print to a networked printer, enter the
networked printer IP address in this field. If you need to change printers:
1
Find your network printer’s IP address. Some printer network adapters
(including the one provided with the Impulse board) require you to load
the adapter configuration software on a Windows PC and obtain the
address from there.
LTX_UG_04.fm Page 39 Thursday, April 7, 2005 11:38 AM
