16
Impulse Whiteboard Operation
Impulse™ L
TX Multimedia Whiteboar
d System
To set up the projector:
1
Locate a projector video cable and connect it to the Impulse control
panel projector connector inside the lower left door.
2
Connect the projector video cable to the projector.
3
Connect the projector’s power cord to an outlet.
4
Turn on the projector and move (or adjust) the projector so the image
projects squarely onto your whiteboard. The projected image need not
fill the white area completely.
Reviewing Archived Images
With a projector connected to the Impulse system, the board acts as
though it were a large interactive screen. The built-in software provides on-
screen tools that enable you to scroll, select, and zoom in and out on
captured images using the stylus as a mouse.
LTX_UG_04.fm Page 16 Thursday, April 7, 2005 11:38 AM
