Polytec PSV-500, Hardware Manual

Page: 26 / 109

3-12
3 First Steps
Back view The back view of the scanning head is shown in the following figure.
Figure 3.9: Back view of the scanning head
1 Transport handle
2 SIGNAL level display
Measure for the light scattered back form the measurement surface The signal
level display is deactivated when the geometry laser ( Geo-Laser ) is activated.
3 LASER L
ED
L
ED
is lit up: scanning head cabled correctly, laser switched on
4 10-32 UNF-2B thread
Connection for a compensation sensor
5 OPTION connection (7-pin circular jack)
Connection for the connecting cable to the PSV-A-T11 pan-tilt head to control the
pan-tilt head via the software (not for PSV-3D).
With option EXT:
OPTION connection (8-pin circular jack)
Connection for the connecting cable to the external scanner control
6 Main connection (industrial-style connector)
Connection for the main cable (Umbilical) to the front-end / to the junction box
7 Identification label
On the identification label you will find, among other things, the serial number of
the instrument.
P S V-500
S C ANN I NG H EAD
Polytec
L ASE R
S I GNA L
OP T IO N
10-32
U N F-2B
2 3
5
1
4 6 7