Polytec PSV-500, Hardware Manual

Page: 73 / 109

A-3
A Optional Accessories
A.2 PSV-A-T11 Motorized Pan-Tilt Head
A.2.1 Assembly
You can assemble the scanning head onto a heavy tripod with motorized pan-
tilt head PSV-A-T11. You can mount the heavy duty tripod on a trolley
(optional).
Assembly kit Unpack the tripod and check the contents of the assembly kit:
Approach You can assemble the scanning head onto the PSV-A-T11 tripod with
motorized pan-tilt head. To do so, proceed as follows:
1. Attach the mounting plate on the bottom of the scanning head with the two
M6 x 16 countersunk screws as show in the following figure. To do this,
use the size 4 mm Allen key.
CAUTION!
Damage caused by assembly error ! Always tighten all screws securely so that stability
and functional accuracy of the system are ensured !
NOTE!
Mount the sides labeled with FRONT in the direction of the front of the scanning head.
1 mounting plate with 2 M6 x 16 countersunk screws
1 adapter plate with 3 M6 x 20 Allen screws
1 connector box with 4 M8 x 40 Allen screws
3 M8 x 16 Allen screws with washers
2 M6 x 16 Allen screws with washers
1 size 4 mm Allen key
1 size 5 mm Allen key
1 size 6 mm Allen key