Polytec PSV-500, Hardware Manual

Page: 35 / 109

3-21
3 First Steps
Junction box to
PC
6. Connect a BNC-SMB connecting cable to the Ch0 BNC jack on the back
of the junction box and to the GENERATOR (Ch0) SMB jack on the back
of the PC.
7. Connect a BNC-SMB connecting cable to the D0 BNC jack on the back of
the junction box and to the GENERATOR (D0) SMB jack on the back of
the PC.
8. Connect the TRIG, AI_1, AI_2 and AI_3 BNC plugs of the ACQ HM
acquisition cable to the TRIG, REF 1, REF 2 and REF 3 BNC jacks on the
back of the junction box.
9. To shield the cable, plug one SHIELD blade receptacle of the ACQ HM
acquisition cable onto the blade connector on the housing of the junction
box.
10. Plug the SCSI plug of the ACQ HM acquisition cable into the
ACQUISITION SCSI connector on the back of the PC.
PC peripherals 11. Connect up the mouse and the keyboard to the back of the PC.
12. Plug the monitor cable into the DVI jack on the monitor and into the
MONITOR DVI jack on the back of the PC.